What size drill for a 5-40 tap?

Short answer: #38 drill (0.1015 in, 2.58 mm). About 72% thread. Closest fractional drill: 3/32 in (96% thread). Metric: 2.60 mm (70%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
5-40 tapped hole drawn to scale: drill #38, thread major diameter 3.18 mm1/16 in
#38#38 drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.1015
Millimetres
2.58
Thread
72%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

5-40 tap drill sizes from 50% to 85% thread

DrillInchmmThread
#360.10652.7157%
#370.10402.6465%
#38Recommended0.10152.5872%
#390.09952.5379%
#400.09802.4983%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a #5 screw

FitDrillInchmm
Close#290.13603.45
Normal#270.14403.66
Loose#240.15203.86

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

5-40 thread dimensions

DimensionInchmm
Major diameter (basic)0.12503.18
Pitch diameter (basic)0.10882.76
Minor diameter, internal (basic)0.09792.49
Pitch (1/40 in)0.02500.64

Unified National Coarse (UNC), 40 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

5-40 UNC tapPlug tap for through holes, bottoming tap for blind holes
#38 drill bit0.1015 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNC tap drill sizes

What size drill for a 5-40 tap? Use a #38 drill — 0.1015 in (2.58 mm) — for about 72% thread. The closest fractional drill is 3/32 in (96% thread).
5-40 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 5-40 tap?

#38 drill (0.1015 in, 2.58 mm), about 72% thread. Fractional alternative: 3/32 in (96% thread).

What metric drill can I use for a 5-40 tap?

2.60 mm gives about 70% thread.

What is the clearance hole for a #5 screw?

Close fit: #29 (0.1360 in); Normal fit: #27 (0.1440 in); Loose fit: #24 (0.1520 in).

What does 5-40 mean?

#5 screw size (0.1250 in major diameter) with 40 threads per inch, Unified National Coarse (UNC).