What size drill for an 8-32 tap?

Short answer: #29 drill (0.1360 in, 3.45 mm). About 69% thread. Closest fractional drill: 9/64 in (58% thread). Metric: 3.40 mm (74%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
8-32 tapped hole drawn to scale: drill #29, thread major diameter 4.17 mm1/8 in
#29#29 drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.1360
Millimetres
3.45
Thread
69%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

8-32 tap drill sizes from 50% to 85% thread

DrillInchmmThread
9/64"0.14063.5758%
#280.14053.5758%
#29Recommended0.13603.4569%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a #8 screw

FitDrillInchmm
Close#160.17704.50
Normal#130.18504.70
Loose#90.19604.98

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

8-32 thread dimensions

DimensionInchmm
Major diameter (basic)0.16404.17
Pitch diameter (basic)0.14373.65
Minor diameter, internal (basic)0.13023.31
Pitch (1/32 in)0.03130.79

Unified National Coarse (UNC), 32 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

8-32 UNC tapPlug tap for through holes, bottoming tap for blind holes
#29 drill bit0.1360 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNC tap drill sizes

What size drill for an 8-32 tap? Use a #29 drill — 0.1360 in (3.45 mm) — for about 69% thread. The closest fractional drill is 9/64 in (58% thread).
8-32 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for an 8-32 tap?

#29 drill (0.1360 in, 3.45 mm), about 69% thread. Fractional alternative: 9/64 in (58% thread).

What metric drill can I use for an 8-32 tap?

3.40 mm gives about 74% thread.

What is the clearance hole for a #8 screw?

Close fit: #16 (0.1770 in); Normal fit: #13 (0.1850 in); Loose fit: #9 (0.1960 in).

What does 8-32 mean?

#8 screw size (0.1640 in major diameter) with 32 threads per inch, Unified National Coarse (UNC).