What size drill for a 1-3/8-6 tap?

Short answer: 1-7/32 in drill (1.2188 in, 30.96 mm). About 72% thread. Metric: 31.00 mm (71%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
1-3/8-6 tapped hole drawn to scale: drill 1-7/32, thread major diameter 34.93 mm1 in
1-7/32"1-7/32 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
1.2188
Millimetres
30.96
Thread
72%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

1-3/8-6 tap drill sizes from 50% to 85% thread

DrillInchmmThread
1-17/64"1.265632.1551%
1-1/4"1.250031.7558%
1-15/64"1.234431.3565%
1-7/32"Recommended1.218830.9672%
1-13/64"1.203130.5679%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 1-3/8 screw

FitDrillInchmm
Close1-27/64"1.421936.12
Normal1-1/2"1.500038.10
Loose1-39/64"1.609440.88

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

1-3/8-6 thread dimensions

DimensionInchmm
Major diameter (basic)1.375034.93
Pitch diameter (basic)1.266732.18
Minor diameter, internal (basic)1.194630.34
Pitch (1/6 in)0.16674.23

Unified National Coarse (UNC), 6 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

1-3/8-6 UNC tapPlug tap for through holes, bottoming tap for blind holes
1-7/32 in drill bit1.2188 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNC tap drill sizes

What size drill for a 1-3/8-6 tap? Use a 1-7/32 in drill — 1.2188 in (30.96 mm) — for about 72% thread.
1-3/8-6 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 1-3/8-6 tap?

1-7/32 in drill (1.2188 in, 30.96 mm), about 72% thread.

What metric drill can I use for a 1-3/8-6 tap?

31.00 mm gives about 71% thread.

What is the clearance hole for a 1-3/8 screw?

Close fit: 1-27/64 in (1.4219 in); Normal fit: 1-1/2 in (1.5000 in); Loose fit: 1-39/64 in (1.6094 in).

What does 1-3/8-6 mean?

1-3/8 in major diameter with 6 threads per inch, Unified National Coarse (UNC).