What size drill for a 1-1/4-7 tap?

Short answer: 1-7/64 in drill (1.1094 in, 28.18 mm). About 76% thread. Metric: 28.00 mm (80%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
1-1/4-7 tapped hole drawn to scale: drill 1-7/64, thread major diameter 31.75 mm1 in
1-7/64"1-7/64 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
1.1094
Millimetres
28.18
Thread
76%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

1-1/4-7 tap drill sizes from 50% to 85% thread

DrillInchmmThread
1-5/32"1.156329.3751%
1-9/64"1.140628.9759%
1-1/8"1.125028.5867%
1-7/64"Recommended1.109428.1876%
1-3/32"1.093827.7884%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 1-1/4 screw

FitDrillInchmm
Close1-19/64"1.296932.94
Normal1-3/8"1.375034.93
Loose1-29/64"1.453136.91

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

1-1/4-7 thread dimensions

DimensionInchmm
Major diameter (basic)1.250031.75
Pitch diameter (basic)1.157229.39
Minor diameter, internal (basic)1.095427.82
Pitch (1/7 in)0.14293.63

Unified National Coarse (UNC), 7 threads per inch. Basic dimensions from the ASME B1.1 formulas.

Same size, other threads

What you'll need

1-1/4-7 UNC tapPlug tap for through holes, bottoming tap for blind holes
1-7/64 in drill bit1.1094 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNC tap drill sizes

What size drill for a 1-1/4-7 tap? Use a 1-7/64 in drill — 1.1094 in (28.18 mm) — for about 76% thread.
1-1/4-7 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 1-1/4-7 tap?

1-7/64 in drill (1.1094 in, 28.18 mm), about 76% thread.

What metric drill can I use for a 1-1/4-7 tap?

28.00 mm gives about 80% thread.

What is the clearance hole for a 1-1/4 screw?

Close fit: 1-19/64 in (1.2969 in); Normal fit: 1-3/8 in (1.3750 in); Loose fit: 1-29/64 in (1.4531 in).

What does 1-1/4-7 mean?

1-1/4 in major diameter with 7 threads per inch, Unified National Coarse (UNC).