UNC tap drill chart

Tap drill sizes for every UNC coarse thread from #1-64 to 1-1/2-6: drill, decimal, mm and percent of thread, plus clearance holes.

6-32 UNC, 10-24 UNC, 1/4-20 UNC, 5/16-18 UNC, 3/8-16 UNC, 1/2-13 UNC taps above their drilled tap holes, drawn to the same scale with an inch and millimetre rulerUNC COARSE TAPStap drill in copper · to scale6-32#3610-24#251/4-20#75/16-18Letter F3/8-165/16"1/2-1327/64"01234in102030405060708090100mm
Download PDF chart

UNC tap drill sizes

ThreadTap drillInchmmThreadClose fitNormal fit
1-64 UNC#530.05951.5167%#46 (0.0810)#44 (0.0860)
2-56 UNC#500.07001.7869%#41 (0.0960)#37 (0.1040)
3-48 UNC#470.07851.9976%7/64" (0.1094)#32 (0.1160)
4-40 UNC#430.08902.2671%#31 (0.1200)#30 (0.1285)
5-40 UNC#380.10152.5872%#29 (0.1360)#27 (0.1440)
6-32 UNC#360.10652.7178%#26 (0.1470)#23 (0.1540)
8-32 UNC#290.13603.4569%#16 (0.1770)#13 (0.1850)
10-24 UNC#250.14953.8075%13/64" (0.2031)#3 (0.2130)
12-24 UNC#160.17704.5072%A (0.2340)B (0.2380)
1/4-20 UNC#70.20105.1175%H (0.2660)J (0.2770)
5/16-18 UNCF0.25706.5377%Q (0.3320)T (0.3580)
3/8-16 UNC5/16"0.31257.9477%X (0.3970)27/64" (0.4219)
7/16-14 UNCU0.36809.3575%15/32" (0.4688)1/2" (0.5000)
1/2-13 UNC27/64"0.421910.7278%35/64" (0.5469)9/16" (0.5625)
9/16-12 UNC31/64"0.484412.3072%39/64" (0.6094)5/8" (0.6250)
5/8-11 UNC17/32"0.531313.4979%43/64" (0.6719)11/16" (0.6875)
3/4-10 UNC21/32"0.656316.6772%51/64" (0.7969)27/32" (0.8438)
7/8-9 UNC49/64"0.765619.4576%59/64" (0.9219)31/32" (0.9688)
1-8 UNC7/8"0.875022.2377%1-3/64" (1.0469)1-7/64" (1.1094)
1-1/8-7 UNC63/64"0.984425.0076%1-11/64" (1.1719)1-1/4" (1.2500)
1-1/4-7 UNC1-7/64"1.109428.1876%1-19/64" (1.2969)1-3/8" (1.3750)
1-3/8-6 UNC1-7/32"1.218830.9672%1-27/64" (1.4219)1-1/2" (1.5000)
1-1/2-6 UNC1-11/32"1.343834.1372%1-35/64" (1.5469)1-5/8" (1.6250)

Tap drill and thread % for each size; click a thread for 50–85% options, clearance holes and dimensions. How we calculate

Other thread series

Questions

How is the UNC tap drill chosen?

It is the standard number, letter or fractional drill nearest to the diameter that gives 75% of full thread depth: drill = major diameter − 0.974 × pitch.

Can I print this chart?

Yes. Download the PDF chart above (US Letter) or use Print; the PDF includes a QR code back to this page.