UNEF tap drill chart

Tap drill sizes for UNEF extra-fine threads from #12-32 to 1-1/2-18: drill, decimal, mm and percent of thread, plus clearance holes.

1/4-32 UNEF, 3/8-32 UNEF, 1/2-28 UNEF, 5/8-24 UNEF, 3/4-20 UNEF, 1-20 UNEF taps above their drilled tap holes, drawn to the same scale with an inch and millimetre rulerUNEF EXTRA-FINE TAPStap drill in copper · to scale1/4-327/32"3/8-3211/32"1/2-2815/32"5/8-2437/64"3/4-2045/64"1-2061/64"0123456789in20406080100120140160180200220mm
Download PDF chart

UNEF tap drill sizes

ThreadTap drillInchmmThreadClose fitNormal fit
12-32 UNEF#130.18504.7076%A (0.2340)B (0.2380)
1/4-32 UNEF7/32"0.21885.5677%H (0.2660)J (0.2770)
5/16-32 UNEF9/32"0.28137.1477%Q (0.3320)T (0.3580)
3/8-32 UNEF11/32"0.34388.7377%X (0.3970)27/64" (0.4219)
7/16-28 UNEFY0.404010.2672%15/32" (0.4688)1/2" (0.5000)
1/2-28 UNEF15/32"0.468811.9167%35/64" (0.5469)9/16" (0.5625)
9/16-24 UNEF33/64"0.515613.1087%39/64" (0.6094)5/8" (0.6250)
5/8-24 UNEF37/64"0.578114.6887%43/64" (0.6719)11/16" (0.6875)
11/16-24 UNEF41/64"0.640616.2787%47/64" (0.7344)49/64" (0.7656)
3/4-20 UNEF45/64"0.703117.8672%51/64" (0.7969)27/32" (0.8438)
13/16-20 UNEF49/64"0.765619.4572%55/64" (0.8594)29/32" (0.9063)
7/8-20 UNEF53/64"0.828121.0372%59/64" (0.9219)31/32" (0.9688)
15/16-20 UNEF57/64"0.890622.6272%63/64" (0.9844)1-1/32" (1.0313)
1-20 UNEF61/64"0.953124.2172%1-3/64" (1.0469)1-7/64" (1.1094)
1-1/16-18 UNEF1-1/64"1.015625.8065%1-7/64" (1.1094)1-3/16" (1.1875)
1-1/8-18 UNEF1-5/64"1.078127.3865%1-11/64" (1.1719)1-1/4" (1.2500)
1-3/16-18 UNEF1-9/64"1.140628.9765%1-15/64" (1.2344)1-5/16" (1.3125)
1-1/4-18 UNEF1-13/64"1.203130.5665%1-19/64" (1.2969)1-3/8" (1.3750)
1-5/16-18 UNEF1-17/64"1.265632.1565%1-23/64" (1.3594)1-7/16" (1.4375)
1-3/8-18 UNEF1-21/64"1.328133.7365%1-27/64" (1.4219)1-1/2" (1.5000)
1-7/16-18 UNEF1-25/64"1.390635.3265%1-31/64" (1.4844)1-9/16" (1.5625)
1-1/2-18 UNEF1-29/64"1.453136.9165%1-35/64" (1.5469)1-5/8" (1.6250)

Tap drill and thread % for each size; click a thread for 50–85% options, clearance holes and dimensions. How we calculate

Other thread series

Questions

How is the UNEF tap drill chosen?

It is the standard number, letter or fractional drill nearest to the diameter that gives 75% of full thread depth: drill = major diameter − 0.974 × pitch.

Can I print this chart?

Yes. Download the PDF chart above (US Letter) or use Print; the PDF includes a QR code back to this page.