What size drill for a 13/16-20 tap?

Short answer: 49/64 in drill (0.7656 in, 19.45 mm). About 72% thread. Metric: 19.50 mm (69%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
13/16-20 tapped hole drawn to scale: drill 49/64, thread major diameter 20.64 mm1/2 in
49/64"49/64 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.7656
Millimetres
19.45
Thread
72%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

13/16-20 tap drill sizes from 50% to 85% thread

DrillInchmmThread
49/64"Recommended0.765619.4572%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 13/16 screw

FitDrillInchmm
Close55/64"0.859421.83
Normal29/32"0.906323.02
Loose63/64"0.984425.00

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

13/16-20 thread dimensions

DimensionInchmm
Major diameter (basic)0.812520.64
Pitch diameter (basic)0.780019.81
Minor diameter, internal (basic)0.758419.26
Pitch (1/20 in)0.05001.27

Unified National Extra Fine (UNEF), 20 threads per inch. Basic dimensions from the ASME B1.1 formulas.

What you'll need

13/16-20 UNEF tapPlug tap for through holes, bottoming tap for blind holes
49/64 in drill bit0.7656 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNEF tap drill sizes

What size drill for a 13/16-20 tap? Use a 49/64 in drill — 0.7656 in (19.45 mm) — for about 72% thread.
13/16-20 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 13/16-20 tap?

49/64 in drill (0.7656 in, 19.45 mm), about 72% thread.

What metric drill can I use for a 13/16-20 tap?

19.50 mm gives about 69% thread.

What is the clearance hole for a 13/16 screw?

Close fit: 55/64 in (0.8594 in); Normal fit: 29/32 in (0.9063 in); Loose fit: 63/64 in (0.9844 in).

What does 13/16-20 mean?

13/16 in major diameter with 20 threads per inch, Unified National Extra Fine (UNEF).