What size drill for a 15/16-20 tap?

Short answer: 57/64 in drill (0.8906 in, 22.62 mm). About 72% thread. Metric: 22.50 mm (80%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
15/16-20 tapped hole drawn to scale: drill 57/64, thread major diameter 23.81 mm1/2 in
57/64"57/64 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.8906
Millimetres
22.62
Thread
72%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

15/16-20 tap drill sizes from 50% to 85% thread

DrillInchmmThread
57/64"Recommended0.890622.6272%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for a 15/16 screw

FitDrillInchmm
Close63/64"0.984425.00
Normal1-1/32"1.031326.19
Loose1-7/64"1.109428.18

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

15/16-20 thread dimensions

DimensionInchmm
Major diameter (basic)0.937523.81
Pitch diameter (basic)0.905022.99
Minor diameter, internal (basic)0.883422.44
Pitch (1/20 in)0.05001.27

Unified National Extra Fine (UNEF), 20 threads per inch. Basic dimensions from the ASME B1.1 formulas.

What you'll need

15/16-20 UNEF tapPlug tap for through holes, bottoming tap for blind holes
57/64 in drill bit0.8906 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNEF tap drill sizes

What size drill for a 15/16-20 tap? Use a 57/64 in drill — 0.8906 in (22.62 mm) — for about 72% thread.
15/16-20 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for a 15/16-20 tap?

57/64 in drill (0.8906 in, 22.62 mm), about 72% thread.

What metric drill can I use for a 15/16-20 tap?

22.50 mm gives about 80% thread.

What is the clearance hole for a 15/16 screw?

Close fit: 63/64 in (0.9844 in); Normal fit: 1-1/32 in (1.0313 in); Loose fit: 1-7/64 in (1.1094 in).

What does 15/16-20 mean?

15/16 in major diameter with 20 threads per inch, Unified National Extra Fine (UNEF).