What size drill for a 3/4-20 tap?
Short answer: 45/64 in drill (0.7031 in, 17.86 mm). About 72% thread. Metric: 18.00 mm (64%).
Your tap
75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).
3/4-20 tap drill sizes from 50% to 85% thread
| Drill | Inch | mm | Thread |
|---|---|---|---|
| 45/64"Recommended | 0.7031 | 17.86 | 72% |
Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate
Clearance hole for a 3/4 screw
Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).
3/4-20 thread dimensions
| Dimension | Inch | mm |
|---|---|---|
| Major diameter (basic) | 0.7500 | 19.05 |
| Pitch diameter (basic) | 0.7175 | 18.23 |
| Minor diameter, internal (basic) | 0.6959 | 17.68 |
| Pitch (1/20 in) | 0.0500 | 1.27 |
Unified National Extra Fine (UNEF), 20 threads per inch. Basic dimensions from the ASME B1.1 formulas.
Same size, other threads
What you'll need
Other UNEF tap drill sizes

Questions
What size drill bit for a 3/4-20 tap?
45/64 in drill (0.7031 in, 17.86 mm), about 72% thread.
What metric drill can I use for a 3/4-20 tap?
18.00 mm gives about 64% thread.
What is the clearance hole for a 3/4 screw?
Close fit: 51/64 in (0.7969 in); Normal fit: 27/32 in (0.8438 in); Loose fit: 57/64 in (0.8906 in).
What does 3/4-20 mean?
3/4 in major diameter with 20 threads per inch, Unified National Extra Fine (UNEF).
https://whatsizeis.com/tap-drill/3-4-20/