What size drill for a 1-7/16-18 tap?
Short answer: 1-25/64 in drill (1.3906 in, 35.32 mm). About 65% thread. Metric: 35.00 mm (83%).
Your tap
75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).
1-7/16-18 tap drill sizes from 50% to 85% thread
| Drill | Inch | mm | Thread |
|---|---|---|---|
| 1-25/64"Recommended | 1.3906 | 35.32 | 65% |
Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate
Clearance hole for a 1-7/16 screw
| Fit | Drill | Inch | mm |
|---|---|---|---|
| Close | 1-31/64" | 1.4844 | 37.70 |
| Normal | 1-9/16" | 1.5625 | 39.69 |
| Loose | 1-11/16" | 1.6875 | 42.86 |
Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).
1-7/16-18 thread dimensions
| Dimension | Inch | mm |
|---|---|---|
| Major diameter (basic) | 1.4375 | 36.51 |
| Pitch diameter (basic) | 1.4014 | 35.60 |
| Minor diameter, internal (basic) | 1.3774 | 34.98 |
| Pitch (1/18 in) | 0.0556 | 1.41 |
Unified National Extra Fine (UNEF), 18 threads per inch. Basic dimensions from the ASME B1.1 formulas.
What you'll need
Other UNEF tap drill sizes

Questions
What size drill bit for a 1-7/16-18 tap?
1-25/64 in drill (1.3906 in, 35.32 mm), about 65% thread.
What metric drill can I use for a 1-7/16-18 tap?
35.00 mm gives about 83% thread.
What is the clearance hole for a 1-7/16 screw?
Close fit: 1-31/64 in (1.4844 in); Normal fit: 1-9/16 in (1.5625 in); Loose fit: 1-11/16 in (1.6875 in).
What does 1-7/16-18 mean?
1-7/16 in major diameter with 18 threads per inch, Unified National Extra Fine (UNEF).
https://whatsizeis.com/tap-drill/1-7-16-18/