What size drill for an 11/16-24 tap?

Short answer: 41/64 in drill (0.6406 in, 16.27 mm). About 87% thread. Metric: 16.50 mm (70%).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
11/16-24 tapped hole drawn to scale: drill 41/64, thread major diameter 17.46 mm1/2 in
41/64"41/64 in drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.6406
Millimetres
16.27
Thread
87%
Download PDF chartShared link keeps your settings: 75% thread, all inch drills

11/16-24 tap drill sizes from 50% to 85% thread

DrillInchmmThread
21/32"0.656316.6758%
41/64"Recommended0.640616.2787%

Recommended: the standard drill nearest to 75% thread. Thread dimensions per ASME B1.1. How we calculate

Clearance hole for an 11/16 screw

FitDrillInchmm
Close47/64"0.734418.65
Normal49/64"0.765619.45
Loose13/16"0.812520.64

Smallest standard inch drill that gives the ISO 273 allowance for the same diameter (close = fine, normal = medium, loose = coarse).

11/16-24 thread dimensions

DimensionInchmm
Major diameter (basic)0.687517.46
Pitch diameter (basic)0.660416.78
Minor diameter, internal (basic)0.642416.32
Pitch (1/24 in)0.04171.06

Unified National Extra Fine (UNEF), 24 threads per inch. Basic dimensions from the ASME B1.1 formulas.

What you'll need

11/16-24 UNEF tapPlug tap for through holes, bottoming tap for blind holes
41/64 in drill bit0.6406 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other UNEF tap drill sizes

What size drill for an 11/16-24 tap? Use a 41/64 in drill — 0.6406 in (16.27 mm) — for about 87% thread.
11/16-24 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for an 11/16-24 tap?

41/64 in drill (0.6406 in, 16.27 mm), about 87% thread.

What metric drill can I use for an 11/16-24 tap?

16.50 mm gives about 70% thread.

What is the clearance hole for an 11/16 screw?

Close fit: 47/64 in (0.7344 in); Normal fit: 49/64 in (0.7656 in); Loose fit: 13/16 in (0.8125 in).

What does 11/16-24 mean?

11/16 in major diameter with 24 threads per inch, Unified National Extra Fine (UNEF).