What size drill for an M8x1 tap?

Short answer: 7 mm drill (0.2756 in, 7.00 mm). That is D − P (8 − 1 mm) and gives about 77% thread. Closest inch drill: J (0.2770 in, 74% thread).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
M8x1 tapped hole drawn to scale: drill 7 mm, thread major diameter 8.00 mm5 mm
7mm7 mm drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.2756
Millimetres
7.00
Thread
77%
Download PDF chartShared link keeps your settings: 75% thread, metric drills

M8x1 tap drill sizes from 50% to 85% thread

DrillInchmmThread
7.3 mm0.28747.3054%
7.2 mm0.28357.2062%
7.1 mm0.27957.1069%
7 mmRecommended0.27567.0077%
6.9 mm0.27176.9085%

Recommended: major diameter minus pitch (ISO 2306 practice). Percent of thread uses the 1.299 × pitch convention of US charts. How we calculate

Clearance hole for an M8 bolt

FitDrillInchmm
Close8.4 mm0.33078.40
Normal9 mm0.35439.00
Loose10 mm0.393710.00

ISO 273: fine (close), medium (normal) and coarse (loose) series.

M8x1 thread dimensions

DimensionInchmm
Major diameter (basic)0.31508.00
Pitch diameter (basic)0.28947.35
Minor diameter, internal (basic)0.27236.92
Pitch0.03941.00

Metric fine (ISO), 1 mm pitch. Basic dimensions from the ISO 261 / ISO 68-1 formulas.

Same size, other threads

What you'll need

M8 x 1 tapPlug tap for through holes, bottoming tap for blind holes
7 mm drill bit0.2756 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other metric tap drill sizes

What size drill for an M8x1 tap? Use a 7 mm drill for an M8 x 1 tap (77% thread). The closest inch drill is J (0.2770 in, 74% thread).
M8x1 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for an M8x1 tap?

7.00 mm (0.2756 in). That is the major diameter minus the pitch (8 − 1 mm) and gives about 77% thread.

Can I use an inch drill for an M8x1 tap?

Yes: letter J drill (0.2770 in, 7.04 mm) gives about 74% thread.

What is the clearance hole for an M8 bolt?

ISO 273: close fit 8.40 mm, normal fit 9.00 mm, loose fit 10.00 mm.

What does M8 x 1 mean?

An 8 mm nominal diameter ISO metric thread with a 1 mm pitch (fine series).