What size drill for an M22x2 tap?

Short answer: 20 mm drill (0.7874 in, 20.00 mm). That is D − P (22 − 2 mm) and gives about 77% thread. Closest inch drill: 25/32 in (0.7813 in, 83% thread).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
M22x2 tapped hole drawn to scale: drill 20 mm, thread major diameter 22.00 mm10 mm
20mm20 mm drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.7874
Millimetres
20.00
Thread
77%
Download PDF chartShared link keeps your settings: 75% thread, metric drills

M22x2 tap drill sizes from 50% to 85% thread

DrillInchmmThread
20.5 mm0.807120.5058%
20 mmRecommended0.787420.0077%

Recommended: major diameter minus pitch (ISO 2306 practice). Percent of thread uses the 1.299 × pitch convention of US charts. How we calculate

Clearance hole for an M22 bolt

FitDrillInchmm
Close23 mm0.905523.00
Normal24 mm0.944924.00
Loose26 mm1.023626.00

ISO 273: fine (close), medium (normal) and coarse (loose) series.

M22x2 thread dimensions

DimensionInchmm
Major diameter (basic)0.866122.00
Pitch diameter (basic)0.815020.70
Minor diameter, internal (basic)0.780919.83
Pitch0.07872.00

Metric fine (ISO), 2 mm pitch. Basic dimensions from the ISO 261 / ISO 68-1 formulas.

Same size, other threads

What you'll need

M22 x 2 tapPlug tap for through holes, bottoming tap for blind holes
20 mm drill bit0.7874 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other metric tap drill sizes

What size drill for an M22x2 tap? Use a 20 mm drill for an M22 x 2 tap (77% thread). The closest inch drill is 25/32 (0.7813 in, 83% thread).
M22x2 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for an M22x2 tap?

20.00 mm (0.7874 in). That is the major diameter minus the pitch (22 − 2 mm) and gives about 77% thread.

Can I use an inch drill for an M22x2 tap?

Yes: 25/32 in drill (0.7813 in, 19.84 mm) gives about 83% thread.

What is the clearance hole for an M22 bolt?

ISO 273: close fit 23.00 mm, normal fit 24.00 mm, loose fit 26.00 mm.

What does M22 x 2 mean?

A 22 mm nominal diameter ISO metric thread with a 2 mm pitch (fine series).