What size drill for an M22x1.5 tap?

Short answer: 20.5 mm drill (0.8071 in, 20.50 mm). That is D − P (22 − 1.5 mm) and gives about 77% thread. Closest inch drill: 13/16 in (0.8125 in, 70% thread).

Your tap

Thread engagement
Drills you have

75% thread is the usual chart value. A lower percentage means a slightly bigger hole and easier tapping in hard or stainless steel. Percent of thread = (major diameter − drill) ÷ (1.299 × pitch).

Use this drill
M22x1.5 tapped hole drawn to scale: drill 20.5 mm, thread major diameter 22.00 mm10 mm
20.5mm20.5 mm drillDrawn to scale. Copper ring: thread depth the tap cuts.
Decimal inch
0.8071
Millimetres
20.50
Thread
77%
Download PDF chartShared link keeps your settings: 75% thread, metric drills

M22x1.5 tap drill sizes from 50% to 85% thread

DrillInchmmThread
21 mm0.826821.0051%
20.5 mmRecommended0.807120.5077%

Recommended: major diameter minus pitch (ISO 2306 practice). Percent of thread uses the 1.299 × pitch convention of US charts. How we calculate

Clearance hole for an M22 bolt

FitDrillInchmm
Close23 mm0.905523.00
Normal24 mm0.944924.00
Loose26 mm1.023626.00

ISO 273: fine (close), medium (normal) and coarse (loose) series.

M22x1.5 thread dimensions

DimensionInchmm
Major diameter (basic)0.866122.00
Pitch diameter (basic)0.827821.03
Minor diameter, internal (basic)0.802220.38
Pitch0.05911.50

Metric fine (ISO), 1.5 mm pitch. Basic dimensions from the ISO 261 / ISO 68-1 formulas.

Same size, other threads

What you'll need

M22 x 1.5 tapPlug tap for through holes, bottoming tap for blind holes
20.5 mm drill bit0.8071 in tap drill
Tap wrenchT-handle for small taps, bar wrench for large
Cutting oilNot needed for brass or cast iron

Other metric tap drill sizes

What size drill for an M22x1.5 tap? Use a 20.5 mm drill for an M22 x 1.5 tap (77% thread). The closest inch drill is 13/16 (0.8125 in, 70% thread).
M22x1.5 tap drill chart as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What size drill bit for an M22x1.5 tap?

20.50 mm (0.8071 in). That is the major diameter minus the pitch (22 − 1.5 mm) and gives about 77% thread.

Can I use an inch drill for an M22x1.5 tap?

Yes: 13/16 in drill (0.8125 in, 20.64 mm) gives about 70% thread.

What is the clearance hole for an M22 bolt?

ISO 273: close fit 23.00 mm, normal fit 24.00 mm, loose fit 26.00 mm.

What does M22 x 1.5 mean?

A 22 mm nominal diameter ISO metric thread with a 1.5 mm pitch (fine series).