What is a 2.9 mm drill bit in inches?
Short answer: 0.1142 in = 2.90 mm. Closest fractional drill: 7/64 in (−0.0048 in). It is the tap drill for M3.5 x 0.6.
Metric drill
2.9mm0.1142 in · 2.90 mm
Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.
Drill sizes close to 2.9 mm
| Drill | Type | Inch | mm | vs 2.9 mm |
|---|---|---|---|---|
| #37 | number | 0.1040 | 2.64 | −0.0102 |
| #36 | number | 0.1065 | 2.71 | −0.0077 |
| 7/64" | fractional | 0.1094 | 2.78 | −0.0048 |
| #35 | number | 0.1100 | 2.79 | −0.0042 |
| #34 | number | 0.1110 | 2.82 | −0.0032 |
| #33 | number | 0.1130 | 2.87 | −0.0012 |
| 2.9 mm | metric | 0.1142 | 2.90 | – |
| #32 | number | 0.1160 | 2.95 | +0.0018 |
| 3 mm | metric | 0.1181 | 3.00 | +0.0039 |
| #31 | number | 0.1200 | 3.05 | +0.0058 |
| 1/8" | fractional | 0.1250 | 3.18 | +0.0108 |
| #30 | number | 0.1285 | 3.26 | +0.0143 |
| 3.3 mm | metric | 0.1299 | 3.30 | +0.0157 |
Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate
What a 2.9 mm drill is used for
What you'll need
2.9 mm jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Metric drill set (0.5 mm steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal
More metric drills

Questions
What is 2.9 mm in inches?
2.9 mm = 0.1142 in (2.90 ÷ 25.4).
What fractional drill is closest to 2.9 mm?
7/64 in drill (0.1094 in, 2.78 mm), smaller by 0.0048 in.
What number drill is closest to 2.9 mm?
#33 drill (0.1130 in, 2.87 mm), smaller by 0.0012 in.
What tap uses a 2.9 mm drill?
M3.5 x 0.6 (recommended tap drill).
https://whatsizeis.com/drill/2-9mm/