What is a 4.5 mm drill bit in inches?

Short answer: 0.1772 in = 4.50 mm. Closest fractional drill: 11/64 in (−0.0053 in). It is the tap drill for M5 x 0.5.

Metric drill

4.5mm0.1772 in · 4.50 mm
4.5 mm drill bit (4.50 mm) drawn to scale with a scale bar10 mm

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest fractional
−0.0053 in
Closest number
−0.0002 in

Drill sizes close to 4.5 mm

DrillTypeInchmmvs 4.5 mm
4.2 mmmetric0.16544.20−0.0118
#19number0.16604.22−0.0112
#18number0.16954.31−0.0077
11/64"fractional0.17194.37−0.0053
#17number0.17304.39−0.0042
#16number0.17704.50−0.0002
4.5 mmmetric0.17724.50–
#15number0.18004.57+0.0028
#14number0.18204.62+0.0048
#13number0.18504.70+0.0078
3/16"fractional0.18754.76+0.0103
#12number0.18904.80+0.0118
#11number0.19104.85+0.0138

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 4.5 mm drill is used for

What you'll need

4.5 mm jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Metric drill set (0.5 mm steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More metric drills

What is a 4.5 mm drill bit in inches? 4.5 mm drill = 0.1772 in = 4.50 mm. Closest fractional drill: 11/64 in (−0.0053 in). It is the tap drill for M5 x 0.5.
4.5 mm drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is 4.5 mm in inches?

4.5 mm = 0.1772 in (4.50 ÷ 25.4).

What fractional drill is closest to 4.5 mm?

11/64 in drill (0.1719 in, 4.37 mm), smaller by 0.0053 in.

What number drill is closest to 4.5 mm?

#16 drill (0.1770 in, 4.50 mm), smaller by 0.0002 in.

What tap uses a 4.5 mm drill?

M5 x 0.5 (recommended tap drill).