What is a 2.5 mm drill bit in inches?

Short answer: 0.0984 in = 2.50 mm. Closest fractional drill: 3/32 in (−0.0047 in). It is the tap drill for M3 x 0.5.

Metric drill

2.5mm0.0984 in · 2.50 mm
2.5 mm drill bit (2.50 mm) drawn to scale with a scale bar10 mm

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest fractional
−0.0047 in
Closest number
−0.0004 in

Drill sizes close to 2.5 mm

DrillTypeInchmmvs 2.5 mm
#44number0.08602.18−0.0124
#43number0.08902.26−0.0094
#42number0.09352.37−0.0049
3/32"fractional0.09382.38−0.0047
#41number0.09602.44−0.0024
#40number0.09802.49−0.0004
2.5 mmmetric0.09842.50–
#39number0.09952.53+0.0011
#38number0.10152.58+0.0031
#37number0.10402.64+0.0056
#36number0.10652.71+0.0081
7/64"fractional0.10942.78+0.0109
#35number0.11002.79+0.0116

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 2.5 mm drill is used for

What you'll need

2.5 mm jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Metric drill set (0.5 mm steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More metric drills

What is a 2.5 mm drill bit in inches? 2.5 mm drill = 0.0984 in = 2.50 mm. Closest fractional drill: 3/32 in (−0.0047 in). It is the tap drill for M3 x 0.5.
2.5 mm drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is 2.5 mm in inches?

2.5 mm = 0.0984 in (2.50 ÷ 25.4).

What fractional drill is closest to 2.5 mm?

3/32 in drill (0.0938 in, 2.38 mm), smaller by 0.0047 in.

What number drill is closest to 2.5 mm?

#40 drill (0.0980 in, 2.49 mm), smaller by 0.0004 in.

What tap uses a 2.5 mm drill?

M3 x 0.5 (recommended tap drill).