What is a 4.2 mm drill bit in inches?

Short answer: 0.1654 in = 4.20 mm. Closest fractional drill: 11/64 in (+0.0065 in). It is the tap drill for M5 x 0.8.

Metric drill

4.2mm0.1654 in · 4.20 mm
4.2 mm drill bit (4.20 mm) drawn to scale with a scale bar10 mm

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest fractional
+0.0065 in
Closest number
+0.0006 in

Drill sizes close to 4.2 mm

DrillTypeInchmmvs 4.2 mm
#23number0.15403.91−0.0114
5/32"fractional0.15633.97−0.0091
#22number0.15703.99−0.0084
4 mmmetric0.15754.00−0.0079
#21number0.15904.04−0.0064
#20number0.16104.09−0.0044
4.2 mmmetric0.16544.20–
#19number0.16604.22+0.0006
#18number0.16954.31+0.0041
11/64"fractional0.17194.37+0.0065
#17number0.17304.39+0.0076
#16number0.17704.50+0.0116
4.5 mmmetric0.17724.50+0.0118

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 4.2 mm drill is used for

What you'll need

4.2 mm jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Metric drill set (0.5 mm steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More metric drills

What is a 4.2 mm drill bit in inches? 4.2 mm drill = 0.1654 in = 4.20 mm. Closest fractional drill: 11/64 in (+0.0065 in). It is the tap drill for M5 x 0.8.
4.2 mm drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is 4.2 mm in inches?

4.2 mm = 0.1654 in (4.20 ÷ 25.4).

What fractional drill is closest to 4.2 mm?

11/64 in drill (0.1719 in, 4.37 mm), larger by 0.0065 in.

What number drill is closest to 4.2 mm?

#19 drill (0.1660 in, 4.22 mm), larger by 0.0006 in.

What tap uses a 4.2 mm drill?

M5 x 0.8 (recommended tap drill).