What is a 3.5 mm drill bit in inches?

Short answer: 0.1378 in = 3.50 mm. Closest fractional drill: 9/64 in (+0.0028 in). It is the tap drill for M4 x 0.5.

Metric drill

3.5mm0.1378 in · 3.50 mm
3.5 mm drill bit (3.50 mm) drawn to scale with a scale bar10 mm

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest fractional
+0.0028 in
Closest number
−0.0018 in

Drill sizes close to 3.5 mm

DrillTypeInchmmvs 3.5 mm
3 mmmetric0.11813.00−0.0197
#31number0.12003.05−0.0178
1/8"fractional0.12503.18−0.0128
#30number0.12853.26−0.0093
3.3 mmmetric0.12993.30−0.0079
#29number0.13603.45−0.0018
3.5 mmmetric0.13783.50–
#28number0.14053.57+0.0027
9/64"fractional0.14063.57+0.0028
#27number0.14403.66+0.0062
#26number0.14703.73+0.0092
#25number0.14953.80+0.0117
#24number0.15203.86+0.0142

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 3.5 mm drill is used for

What you'll need

3.5 mm jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Metric drill set (0.5 mm steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More metric drills

What is a 3.5 mm drill bit in inches? 3.5 mm drill = 0.1378 in = 3.50 mm. Closest fractional drill: 9/64 in (+0.0028 in). It is the tap drill for M4 x 0.5.
3.5 mm drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is 3.5 mm in inches?

3.5 mm = 0.1378 in (3.50 ÷ 25.4).

What fractional drill is closest to 3.5 mm?

9/64 in drill (0.1406 in, 3.57 mm), larger by 0.0028 in.

What number drill is closest to 3.5 mm?

#29 drill (0.1360 in, 3.45 mm), smaller by 0.0018 in.

What tap uses a 3.5 mm drill?

M4 x 0.5 (recommended tap drill).