What is a 3.3 mm drill bit in inches?

Short answer: 0.1299 in = 3.30 mm. Closest fractional drill: 1/8 in (−0.0049 in). It is the tap drill for M4 x 0.7.

Metric drill

3.3mm0.1299 in · 3.30 mm
3.3 mm drill bit (3.30 mm) drawn to scale with a scale bar10 mm

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest fractional
−0.0049 in
Closest number
−0.0014 in

Drill sizes close to 3.3 mm

DrillTypeInchmmvs 3.3 mm
2.9 mmmetric0.11422.90−0.0157
#32number0.11602.95−0.0139
3 mmmetric0.11813.00−0.0118
#31number0.12003.05−0.0099
1/8"fractional0.12503.18−0.0049
#30number0.12853.26−0.0014
3.3 mmmetric0.12993.30–
#29number0.13603.45+0.0061
3.5 mmmetric0.13783.50+0.0079
#28number0.14053.57+0.0106
9/64"fractional0.14063.57+0.0107
#27number0.14403.66+0.0141
#26number0.14703.73+0.0171

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 3.3 mm drill is used for

What you'll need

3.3 mm jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Metric drill set (0.5 mm steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More metric drills

What is a 3.3 mm drill bit in inches? 3.3 mm drill = 0.1299 in = 3.30 mm. Closest fractional drill: 1/8 in (−0.0049 in). It is the tap drill for M4 x 0.7.
3.3 mm drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is 3.3 mm in inches?

3.3 mm = 0.1299 in (3.30 ÷ 25.4).

What fractional drill is closest to 3.3 mm?

1/8 in drill (0.1250 in, 3.18 mm), smaller by 0.0049 in.

What number drill is closest to 3.3 mm?

#30 drill (0.1285 in, 3.26 mm), smaller by 0.0014 in.

What tap uses a 3.3 mm drill?

M4 x 0.7 (recommended tap drill).