What is a 0.75 mm drill bit in inches?

Short answer: 0.0295 in = 0.75 mm. Closest fractional drill: 1/32 in (+0.0017 in). It is the tap drill for M1 x 0.25.

Metric drill

0.75mm0.0295 in · 0.75 mm
0.75 mm drill bit (0.75 mm) drawn to scale with a scale bar10 mm

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest fractional
+0.0017 in
Closest number
−0.0003 in

Drill sizes close to 0.75 mm

DrillTypeInchmmvs 0.75 mm
#74number0.02250.57−0.0070
#73number0.02400.61−0.0055
#72number0.02500.64−0.0045
#71number0.02600.66−0.0035
#70number0.02800.71−0.0015
#69number0.02920.74−0.0003
0.75 mmmetric0.02950.75–
#68number0.03100.79+0.0015
1/32"fractional0.03130.79+0.0017
#67number0.03200.81+0.0025
#66number0.03300.84+0.0035
#65number0.03500.89+0.0055
#64number0.03600.91+0.0065

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 0.75 mm drill is used for

What you'll need

0.75 mm jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Metric drill set (0.5 mm steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More metric drills

What is a 0.75 mm drill bit in inches? 0.75 mm drill = 0.0295 in = 0.75 mm. Closest fractional drill: 1/32 in (+0.0017 in). It is the tap drill for M1 x 0.25.
0.75 mm drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is 0.75 mm in inches?

0.75 mm = 0.0295 in (0.75 ÷ 25.4).

What fractional drill is closest to 0.75 mm?

1/32 in drill (0.0313 in, 0.79 mm), larger by 0.0017 in.

What number drill is closest to 0.75 mm?

#69 drill (0.0292 in, 0.74 mm), smaller by 0.0003 in.

What tap uses a 0.75 mm drill?

M1 x 0.25 (recommended tap drill).