What is a 31 mm drill bit in inches?

Short answer: 1.2205 in = 31.00 mm. Closest fractional drill: 1-7/32 in (−0.0017 in). It is the tap drill for M33 x 2.

Metric drill

31mm1.2205 in · 31.00 mm
31 mm drill bit (31.00 mm) drawn to scale with a scale bar50 mm

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest fractional
1-7/32"
−0.0017 in

Drill sizes close to 31 mm

DrillTypeInchmmvs 31 mm
25.5 mmmetric1.003925.50−0.2165
26.5 mmmetric1.043326.50−0.1772
28 mmmetric1.102428.00−0.1181
28.5 mmmetric1.122028.50−0.0984
29 mmmetric1.141729.00−0.0787
29.5 mmmetric1.161429.50−0.0591
31 mmmetric1.220531.00–
32 mmmetric1.259832.00+0.0394
34.5 mmmetric1.358334.50+0.1378
35 mmmetric1.378035.00+0.1575
37.5 mmmetric1.476437.50+0.2559
40.5 mmmetric1.594540.50+0.3740
43 mmmetric1.692943.00+0.4724

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 31 mm drill is used for

What you'll need

31 mm jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Metric drill set (0.5 mm steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More metric drills

What is a 31 mm drill bit in inches? 31 mm drill = 1.2205 in = 31.00 mm. Closest fractional drill: 1-7/32 in (−0.0017 in). It is the tap drill for M33 x 2.
31 mm drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is 31 mm in inches?

31 mm = 1.2205 in (31.00 ÷ 25.4).

What fractional drill is closest to 31 mm?

1-7/32 in drill (1.2188 in, 30.96 mm), smaller by 0.0017 in.

What tap uses a 31 mm drill?

M33 x 2 (recommended tap drill).