What is a 29 mm drill bit in inches?

Short answer: 1.1417 in = 29.00 mm. Closest fractional drill: 1-9/64 in (−0.0011 in). It is the tap drill for M30 x 1.

Metric drill

29mm1.1417 in · 29.00 mm
29 mm drill bit (29.00 mm) drawn to scale with a scale bar50 mm

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest fractional
1-9/64"
−0.0011 in

Drill sizes close to 29 mm

DrillTypeInchmmvs 29 mm
63/64"fractional0.984425.00−0.1574
1"fractional1.000025.40−0.1417
25.5 mmmetric1.003925.50−0.1378
26.5 mmmetric1.043326.50−0.0984
28 mmmetric1.102428.00−0.0394
28.5 mmmetric1.122028.50−0.0197
29 mmmetric1.141729.00–
29.5 mmmetric1.161429.50+0.0197
31 mmmetric1.220531.00+0.0787
32 mmmetric1.259832.00+0.1181
34.5 mmmetric1.358334.50+0.2165
35 mmmetric1.378035.00+0.2362
37.5 mmmetric1.476437.50+0.3346

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 29 mm drill is used for

What you'll need

29 mm jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Metric drill set (0.5 mm steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More metric drills

What is a 29 mm drill bit in inches? 29 mm drill = 1.1417 in = 29.00 mm. Closest fractional drill: 1-9/64 in (−0.0011 in). It is the tap drill for M30 x 1.
29 mm drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is 29 mm in inches?

29 mm = 1.1417 in (29.00 ÷ 25.4).

What fractional drill is closest to 29 mm?

1-9/64 in drill (1.1406 in, 28.97 mm), smaller by 0.0011 in.

What tap uses a 29 mm drill?

M30 x 1 (recommended tap drill).