What is a 37.5 mm drill bit in inches?

Short answer: 1.4764 in = 37.50 mm. Closest fractional drill: 1-15/32 in (−0.0076 in). It is the tap drill for M42 x 4.5.

Metric drill

37.5mm1.4764 in · 37.50 mm
37.5 mm drill bit (37.50 mm) drawn to scale with a scale bar50 mm

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest fractional
1-15/32"
−0.0076 in

Drill sizes close to 37.5 mm

DrillTypeInchmmvs 37.5 mm
29 mmmetric1.141729.00−0.3346
29.5 mmmetric1.161429.50−0.3150
31 mmmetric1.220531.00−0.2559
32 mmmetric1.259832.00−0.2165
34.5 mmmetric1.358334.50−0.1181
35 mmmetric1.378035.00−0.0984
37.5 mmmetric1.476437.50–
40.5 mmmetric1.594540.50+0.1181
43 mmmetric1.692943.00+0.2165

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 37.5 mm drill is used for

What you'll need

37.5 mm jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Metric drill set (0.5 mm steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More metric drills

What is a 37.5 mm drill bit in inches? 37.5 mm drill = 1.4764 in = 37.50 mm. Closest fractional drill: 1-15/32 in (−0.0076 in). It is the tap drill for M42 x 4.5.
37.5 mm drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is 37.5 mm in inches?

37.5 mm = 1.4764 in (37.50 ÷ 25.4).

What fractional drill is closest to 37.5 mm?

1-15/32 in drill (1.4688 in, 37.31 mm), smaller by 0.0076 in.

What tap uses a 37.5 mm drill?

M42 x 4.5 (recommended tap drill).