What is a 26.5 mm drill bit in inches?

Short answer: 1.0433 in = 26.50 mm. Closest fractional drill: 1-3/64 in (+0.0036 in). It is the tap drill for M30 x 3.5.

Metric drill

26.5mm1.0433 in · 26.50 mm
26.5 mm drill bit (26.50 mm) drawn to scale with a scale bar50 mm

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest fractional
1-3/64"
+0.0036 in

Drill sizes close to 26.5 mm

DrillTypeInchmmvs 26.5 mm
61/64"fractional0.953124.21−0.0902
31/32"fractional0.968824.61−0.0746
25 mmmetric0.984325.00−0.0591
63/64"fractional0.984425.00−0.0589
1"fractional1.000025.40−0.0433
25.5 mmmetric1.003925.50−0.0394
26.5 mmmetric1.043326.50–
28 mmmetric1.102428.00+0.0591
28.5 mmmetric1.122028.50+0.0787
29 mmmetric1.141729.00+0.0984
29.5 mmmetric1.161429.50+0.1181
31 mmmetric1.220531.00+0.1772
32 mmmetric1.259832.00+0.2165

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 26.5 mm drill is used for

What you'll need

26.5 mm jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Metric drill set (0.5 mm steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More metric drills

What is a 26.5 mm drill bit in inches? 26.5 mm drill = 1.0433 in = 26.50 mm. Closest fractional drill: 1-3/64 in (+0.0036 in). It is the tap drill for M30 x 3.5.
26.5 mm drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is 26.5 mm in inches?

26.5 mm = 1.0433 in (26.50 ÷ 25.4).

What fractional drill is closest to 26.5 mm?

1-3/64 in drill (1.0469 in, 26.59 mm), larger by 0.0036 in.

What tap uses a 26.5 mm drill?

M30 x 3.5 (recommended tap drill).