What is a 29.5 mm drill bit in inches?

Short answer: 1.1614 in = 29.50 mm. Closest fractional drill: 1-5/32 in (−0.0052 in). It is the tap drill for M33 x 3.5.

Metric drill

29.5mm1.1614 in · 29.50 mm
29.5 mm drill bit (29.50 mm) drawn to scale with a scale bar50 mm

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest fractional
1-5/32"
−0.0052 in

Drill sizes close to 29.5 mm

DrillTypeInchmmvs 29.5 mm
1"fractional1.000025.40−0.1614
25.5 mmmetric1.003925.50−0.1575
26.5 mmmetric1.043326.50−0.1181
28 mmmetric1.102428.00−0.0591
28.5 mmmetric1.122028.50−0.0394
29 mmmetric1.141729.00−0.0197
29.5 mmmetric1.161429.50–
31 mmmetric1.220531.00+0.0591
32 mmmetric1.259832.00+0.0984
34.5 mmmetric1.358334.50+0.1969
35 mmmetric1.378035.00+0.2165
37.5 mmmetric1.476437.50+0.3150
40.5 mmmetric1.594540.50+0.4331

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 29.5 mm drill is used for

What you'll need

29.5 mm jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Metric drill set (0.5 mm steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More metric drills

What is a 29.5 mm drill bit in inches? 29.5 mm drill = 1.1614 in = 29.50 mm. Closest fractional drill: 1-5/32 in (−0.0052 in). It is the tap drill for M33 x 3.5.
29.5 mm drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is 29.5 mm in inches?

29.5 mm = 1.1614 in (29.50 ÷ 25.4).

What fractional drill is closest to 29.5 mm?

1-5/32 in drill (1.1563 in, 29.37 mm), smaller by 0.0052 in.

What tap uses a 29.5 mm drill?

M33 x 3.5 (recommended tap drill).