What is a 28.5 mm drill bit in inches?

Short answer: 1.1220 in = 28.50 mm. Closest fractional drill: 1-1/8 in (+0.0030 in). It is the tap drill for M30 x 1.5.

Metric drill

28.5mm1.1220 in · 28.50 mm
28.5 mm drill bit (28.50 mm) drawn to scale with a scale bar50 mm

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest fractional
1-1/8"
+0.0030 in

Drill sizes close to 28.5 mm

DrillTypeInchmmvs 28.5 mm
25 mmmetric0.984325.00−0.1378
63/64"fractional0.984425.00−0.1377
1"fractional1.000025.40−0.1220
25.5 mmmetric1.003925.50−0.1181
26.5 mmmetric1.043326.50−0.0787
28 mmmetric1.102428.00−0.0197
28.5 mmmetric1.122028.50–
29 mmmetric1.141729.00+0.0197
29.5 mmmetric1.161429.50+0.0394
31 mmmetric1.220531.00+0.0984
32 mmmetric1.259832.00+0.1378
34.5 mmmetric1.358334.50+0.2362
35 mmmetric1.378035.00+0.2559

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 28.5 mm drill is used for

What you'll need

28.5 mm jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Metric drill set (0.5 mm steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More metric drills

What is a 28.5 mm drill bit in inches? 28.5 mm drill = 1.1220 in = 28.50 mm. Closest fractional drill: 1-1/8 in (+0.0030 in). It is the tap drill for M30 x 1.5.
28.5 mm drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is 28.5 mm in inches?

28.5 mm = 1.1220 in (28.50 ÷ 25.4).

What fractional drill is closest to 28.5 mm?

1-1/8 in drill (1.1250 in, 28.58 mm), larger by 0.0030 in.

What tap uses a 28.5 mm drill?

M30 x 1.5 (recommended tap drill).