What is a 23/32 inch drill bit in mm?

Short answer: 0.7188 in = 18.26 mm. Closest metric drill: 18.5 mm (+0.0096 in). It is the tap drill for 1/2-14 NPT.

Fractional drill

23/32"0.7188 in · 18.26 mm
23/32" drill bit (18.26 mm) drawn to scale with a scale bar2 in

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest metric
+0.0096 in

Drill sizes close to 23/32"

DrillTypeInchmmvs 23/32"
17 mmmetric0.669317.00−0.0495
43/64"fractional0.671917.07−0.0469
11/16"fractional0.687517.46−0.0313
17.5 mmmetric0.689017.50−0.0298
45/64"fractional0.703117.86−0.0156
18 mmmetric0.708718.00−0.0101
23/32"fractional0.718818.26–
18.5 mmmetric0.728318.50+0.0096
47/64"fractional0.734418.65+0.0156
19 mmmetric0.748019.00+0.0293
3/4"fractional0.750019.05+0.0313
49/64"fractional0.765619.45+0.0469
19.5 mmmetric0.767719.50+0.0490

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 23/32" drill is used for

What you'll need

23/32 in jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Fractional drill set (1/64 in steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More fractional drills

What is a 23/32 inch drill bit in mm? 23/32 in drill = 0.7188 in = 18.26 mm. Closest metric drill: 18.5 mm (+0.0096 in). It is the tap drill for 1/2-14 NPT.
23/32" drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is a 23/32 in drill in inches?

0.7188 in.

What is a 23/32 in drill in mm?

18.26 mm (0.7188 × 25.4).

What metric drill is closest to 23/32 in?

18.5 mm drill (0.7283 in, 18.50 mm), larger by 0.0096 in.

What tap uses a 23/32 in drill?

1/2-14 NPT (recommended tap drill).