What is a 3/4 inch drill bit in mm?

Short answer: 0.7500 in = 19.05 mm. Closest metric drill: 19 mm (−0.0020 in).

Fractional drill

3/4"0.7500 in · 19.05 mm
3/4" drill bit (19.05 mm) drawn to scale with a scale bar2 in

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest metric
−0.0020 in

Drill sizes close to 3/4"

DrillTypeInchmmvs 3/4"
45/64"fractional0.703117.86−0.0469
18 mmmetric0.708718.00−0.0413
23/32"fractional0.718818.26−0.0313
18.5 mmmetric0.728318.50−0.0217
47/64"fractional0.734418.65−0.0156
19 mmmetric0.748019.00−0.0020
3/4"fractional0.750019.05–
49/64"fractional0.765619.45+0.0156
19.5 mmmetric0.767719.50+0.0177
25/32"fractional0.781319.84+0.0313
20 mmmetric0.787420.00+0.0374
51/64"fractional0.796920.24+0.0469
20.5 mmmetric0.807120.50+0.0571

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What you'll need

3/4 in jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Fractional drill set (1/64 in steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More fractional drills

What is a 3/4 inch drill bit in mm? 3/4 in drill = 0.7500 in = 19.05 mm. Closest metric drill: 19 mm (−0.0020 in).
3/4" drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is a 3/4 in drill in inches?

0.7500 in.

What is a 3/4 in drill in mm?

19.05 mm (0.7500 × 25.4).

What metric drill is closest to 3/4 in?

19 mm drill (0.7480 in, 19.00 mm), smaller by 0.0020 in.