What is an 11 mm drill bit in inches?

Short answer: 0.4331 in = 11.00 mm. Closest fractional drill: 7/16 in (+0.0044 in). It is the tap drill for M12 x 1.

Metric drill

11mm0.4331 in · 11.00 mm
11 mm drill bit (11.00 mm) drawn to scale with a scale bar25 mm

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest fractional
+0.0044 in

Drill sizes close to 11 mm

DrillTypeInchmmvs 11 mm
Yletter0.404010.26−0.0291
13/32"fractional0.406310.32−0.0268
Zletter0.413010.49−0.0201
10.5 mmmetric0.413410.50−0.0197
27/64"fractional0.421910.72−0.0112
10.8 mmmetric0.425210.80−0.0079
11 mmmetric0.433111.00–
7/16"fractional0.437511.11+0.0044
11.5 mmmetric0.452811.50+0.0197
29/64"fractional0.453111.51+0.0201
15/32"fractional0.468811.91+0.0357
12 mmmetric0.472412.00+0.0394
31/64"fractional0.484412.30+0.0513

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 11 mm drill is used for

What you'll need

11 mm jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Metric drill set (0.5 mm steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More metric drills

What is an 11 mm drill bit in inches? 11 mm drill = 0.4331 in = 11.00 mm. Closest fractional drill: 7/16 in (+0.0044 in). It is the tap drill for M12 x 1.
11 mm drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is 11 mm in inches?

11 mm = 0.4331 in (11.00 ÷ 25.4).

What fractional drill is closest to 11 mm?

7/16 in drill (0.4375 in, 11.11 mm), larger by 0.0044 in.

What tap uses an 11 mm drill?

M12 x 1 (recommended tap drill).