What is a 10.8 mm drill bit in inches?

Short answer: 0.4252 in = 10.80 mm. Closest fractional drill: 27/64 in (−0.0033 in). It is the tap drill for M12 x 1.25.

Metric drill

10.8mm0.4252 in · 10.80 mm
10.8 mm drill bit (10.80 mm) drawn to scale with a scale bar25 mm

Drawn to scale (see the scale bar). For a true 1:1 drawing, print the PDF chart at 100%.

Closest fractional
−0.0033 in

Drill sizes close to 10.8 mm

DrillTypeInchmmvs 10.8 mm
10.2 mmmetric0.401610.20−0.0236
Yletter0.404010.26−0.0212
13/32"fractional0.406310.32−0.0189
Zletter0.413010.49−0.0122
10.5 mmmetric0.413410.50−0.0118
27/64"fractional0.421910.72−0.0033
10.8 mmmetric0.425210.80–
11 mmmetric0.433111.00+0.0079
7/16"fractional0.437511.11+0.0123
11.5 mmmetric0.452811.50+0.0276
29/64"fractional0.453111.51+0.0279
15/32"fractional0.468811.91+0.0436
12 mmmetric0.472412.00+0.0472

Number and letter drill diameters per ASME B94.11M. 1 in = 25.4 mm exactly. How we calculate

What a 10.8 mm drill is used for

What you'll need

10.8 mm jobber drill bitHSS for wood, plastic and mild steel; cobalt for stainless
Metric drill set (0.5 mm steps)Cheaper than single bits if you tap often
Center punchStops the bit walking on metal

More metric drills

What is a 10.8 mm drill bit in inches? 10.8 mm drill = 0.4252 in = 10.80 mm. Closest fractional drill: 27/64 in (−0.0033 in). It is the tap drill for M12 x 1.25.
10.8 mm drill size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What is 10.8 mm in inches?

10.8 mm = 0.4252 in (10.80 ÷ 25.4).

What fractional drill is closest to 10.8 mm?

27/64 in drill (0.4219 in, 10.72 mm), smaller by 0.0033 in.

What tap uses a 10.8 mm drill?

M12 x 1.25 (recommended tap drill).