What is the actual size of a 1x4?

Short answer: 3/4 × 3-1/2 inches (dry). A 1x4 is 3/4 by 3-1/2 inches (19.1 × 88.9 mm) when dry; 25/32 × 3-9/16 in when green. 1x4 is the nominal size; PS 20 sets the minimum size after planing.

Actual size of a 1x4

3/4" × 3-1/2"19.1 × 88.9 mm · dry (19% moisture or less)
End view of a 1x4 drawn to scale: the dry dressed size 3/4 by 3-1/2 inches inside the dashed nominal 1 by 4 inch outline, with an inch scalenominal 1 × 4 in (dashed)3-1/2" (88.9 mm)3/4"19.1 mm01234in

End view drawn to scale: the solid piece is the actual dry size, the dashed outline is the nominal 1" × 4". The PDF chart prints the end view at actual size (print at 100%).

Actual thickness
3/4"
0.75 in · 19.1 mm
Actual width
3-1/2"
3.5 in · 88.9 mm
Green (over 19% moisture)
25/32" × 3-9/16"
19.8 × 90.5 mm
Smaller than nominal by
1/4" × 1/2"
board

Other 1-inch nominal sizes

NominalActual, dry (in)Actual, dry (mm)Green (in)
1x23/4 × 1-1/219.1 × 38.125/32 × 1-9/16
1x33/4 × 2-1/219.1 × 63.525/32 × 2-9/16
1x43/4 × 3-1/219.1 × 88.925/32 × 3-9/16
1x53/4 × 4-1/219.1 × 114.325/32 × 4-5/8
1x63/4 × 5-1/219.1 × 139.725/32 × 5-5/8
1x83/4 × 7-1/419.1 × 184.225/32 × 7-1/2
1x103/4 × 9-1/419.1 × 235.025/32 × 9-1/2

Minimum dressed sizes of softwood boards (nominal thickness under 2 in) per NIST PS 20-25, Table 3. Dry = 19% moisture content or less; green = over 19%. mm = inches × 25.4. How we calculate

How to read a 1x4

  1. The first number is the nominal thickness (1 in), the second the nominal width (4 in).
  2. Look up the dressed size in PS 20: 3/4 in thick and 3-1/2 in wide when dry.
  3. Plan cuts and spacing with the actual size, not the name: two 1x4s side by side are 1-1/2 in thick, not 2 in.

More sizes and conversions

What you'll need

Tape measure with 1/16 in marksCheck the real size before you cut or buy
Combination squareMeasures thickness and marks square cuts
Digital caliperReads 1/32 in differences between dry and green stock
1x4 actual size: 3/4 x 3-1/2 inches
1x4 actual size as a pictureThe same numbers as on this page, as one picture you can save. The printable 1:1 chart is the PDF above.

Questions

What are the actual dimensions of a 1x4?

A 1x4 is 3/4 by 3-1/2 inches (19.1 × 88.9 mm) when dry, per the American Softwood Lumber Standard (NIST PS 20). A green (unseasoned) 1x4 is 25/32 by 3-9/16 inches.

Why is a 1x4 not 1 by 4 inches?

"1x4" is the nominal size, the name the lumber is sold by. The board is dressed (planed smooth) at the mill, and PS 20 sets the smallest size it may have after dressing: 1/4 in less than nominal in thickness and 1/2 in less in width for a dry 1x4.

What is a 1x4 in mm?

19.1 × 88.9 mm dry (3/4 × 3-1/2 in × 25.4); 19.8 × 90.5 mm green.

What is the actual size of a 1x4 in decimals?

0.75 × 3.5 inches dry, 0.78125 × 3.5625 inches green.

What is the difference between dry and green 1x4 sizes?

PS 20 calls lumber dry when its moisture content is 19% or less and green above 19%. Green lumber is dressed a little larger (25/32 × 3-9/16 in) because it shrinks as it dries.